Boronizing treatment of steel screw barrel surface
Published:
2022-10-13 11:50
Screw and barrel are mostly scrapped due to large gap caused by wear, which can not be extruded and injected normally. Few of them fail due to insufficient strength. Especially, in addition to strength, more consideration should be given to structural commonweal and thermal inertia in the design of barrel, and the wall thickness determined by the latter two factors should be far greater than the calculated value of strength conditions
Screw and barrel are mostly scrapped due to large gap caused by wear, which can not be extruded and injected normally. Few of them fail due to insufficient strength. Especially, in addition to strength, more consideration should be given to structural commonweal and thermal inertia in the design of barrel, and the wall thickness determined by the latter two factors should be far greater than the calculated value of strength conditions
The chrome plated screw and barrel of 45 # steel and 40Cr steel commonly used in China have uneven coating and low fastness to collective bonding, which will cause local peeling during work and rapid wear or corrosion. Compared with the performance of nitriding screw and barrel only, they are better and are widely used at present. Their disadvantages are that nitriding steel has high price, nitriding layer has low hydrogen chloride corrosion resistance, and surface hardness and wear resistance are still difficult to meet the requirements of extrusion The need for injection and processing of reinforced plastics. Improving the surface hardness and wear resistance of the extruder screw, the injection molding machine screw and the barrel has become a key technical issue in the plastic processing industry to improve productivity, improve plasticizing quality and reduce production costs. This paper only conducts and tests the feasibility of the boronizing treatment process for the surface of 45 steel screw and barrel, and verifies it in the form of product installation assessment
Other
10/13
2022
Boronizing treatment of steel screw barrel surface
Screw and barrel are mostly scrapped due to large gap caused by wear, which can not be extruded and injected normally. Few of them fail due to insufficient strength. Especially, in addition to strength, more consideration should be given to structural commonweal and thermal inertia in the design of barrel, and the wall thickness determined by the latter two factors should be far greater than the calculated value of strength conditions
View detail10/13
2022
Extruder Screw Design and Repair Process
The extrusion system consists of screw and barrel, which is the "heart" of extrusion work. The screw completes the continuous conveying, plasticizing, homogenizing, constant pressure and quantitative extrusion of plastics in the barrel. The types of screws are: constant pitch gradual change screw, constant pitch depth abrupt change screw, variable depth variable pitch screw, etc. The structure of constant pitch progressive screw is studied as an example. Its main features: the thread pitch of the screw thread is equal, while the depth of the thread groove remains unchanged in the feeding section and homogenizing section, while the depth of the thread groove in the plasticizing section gradually becomes shallow from the depth, which is suitable for extrusion plasticization of various plastics. The progressive screw divides the working length of the screw into three basic functional segments,
View detail10/13
2022
How to judge the output of extruder screw?
The output is a main index to evaluate the performance of extruder screw. However, it is not significant to only emphasize the percentage increase in the output of the improved screw compared with the original screw, because the benchmark for comparison is not clear. From the theory of fluid dynamics, we know that the output will be greatly improved if the worn screw is replaced by the screw with smaller screw clearance. In order to accurately reflect the performance of the screw, the following four aspects can be compared.
View detail10/13
2022
Share standards for extruder screw performance
Extrusion process is a complex process, which involves many factors. Facts show that it is one-sided to evaluate the performance of extruder screw only according to the productivity. As we all know, if the colleague with high output has high capacity consumption, the screw is not desirable. For another example, if the extrudate has a high temperature rise at the same time of high output, the cooling burden of the main and auxiliary engines will increase. In fact, such screws cannot be used at high speed, and their performance is not much better than that of ordinary screws at low speed.
View detailNo. 9, Jixiang Road, Xihou Industrial Zone, Jintang Town, Dinghai District, Zhoushan City, Zhejiang Province
Scan WeChat